Troop Comforts Limited

A Government of India Enterprise
Ministry of Defence
TCL Corporate Bhawan, G.T. Road, Kanpur, (U.P)-208013

Phone: 0512-2451781-82 | Email: info@troopcomfortslimited.co.in

REGISTRATION CERTIFICATE

This is to certify that M/S SUCHI ENTERPRISES, 4/284, NAVSHEEL SADAN, FLAT NO. 504, PARVATI BAGLA ROAD, KANPUR, UTTAR PRADESH, Pin-208002 is registered at Troop Comforts Limited for following Items.

Sr No	Factory/ Unit	Item Nomenclature	Reg. Date
1	Ordnance Equipment Factory Hazaratpur	Description : FASTENERS SYNTHETIC HOOK & LOOP TAPE VARIOUS ( Specification : IS 8156 : 1994)	22-06-2019
2	Ordnance Equipment Factory Hazaratpur	Frame carrier man pack (As per governing lay down specification.) (Sole Selling Agent of M/s Mittal appliances Ltd, Madhya Pradesh) (as a sole selling agent (SSA) of firm M/S MITTAL APPLIANCE LTD.)	12-06-2024
3	Ordnance Equipment Factory	ALUMINIUM ALLOY RODS OR ROUNDS OR WIRES VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	06-02-2015
4	Ordnance Equipment Factory	ALUMINIUM ALLOY SHEETS OR PLATES VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	06-02-2015
5	Ordnance Equipment Factory	BRASS RODS OR ROUNDS OR WIRES VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	06-02-2015
6	Ordnance Equipment Factory	BRASS SHEETS OR PLATES VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	06-02-2015
7	Ordnance Equipment Factory	BRASS STRIPS VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	06-02-2015
8	Ordnance Equipment Factory	BRASS TUBES VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	06-02-2015
9	Ordnance Equipment Factory	COPPER SHEETS OR STRIPS VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	06-02-2015
10	Ordnance Equipment Factory	COPPER TUBES VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	06-02-2015
11	Ordnance Equipment Factory	FIBRE SHEETS VARIOUS (AS PER REQUIREMENT & SPECIFICATION)	17-08-2015
12	Ordnance Equipment Factory	HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER Description : HEAT ACTIVATED THERMOPLASTIC SHEET FOR TOE PUFF AND COUNTER STIFFNER ( Specification : AS PER APPENDIX ‘E’ & ‘F’ OF IND/TC/3838(K))	04-07-2019
13	Ordnance Equipment Factory	TACK LASTING MACHINE 10 MM RP IMPORTED Description : TACK LASTING MACHINE 10 MM RP IMPORTED ( Specification : AS PER REQUIREMENT AND SPECIFICATION)	04-07-2019
14	Ordnance Equipment Factory	MIG WIRE POINT 8 MM DIA[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : S. T. S.)	18-05-2023
15	Ordnance Equipment Factory	MILD STEEL PLATE FLAT 3MM THICK[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : IS: 226, GRADE ST42-S)	18-05-2023
16	Ordnance Equipment Factory	MILD STEEL ROD 10 MM DIA[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : IS 280-2006, GRADE ¼ HARD)	18-05-2023
17	Ordnance Equipment Factory	MILD STEEL TWISTED BAR 20 MM DIA[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : IS 1786-2008, GRADE FE 500D)	18-05-2023
18	Ordnance Equipment Factory	S M ANGLE 50X50X6 IN STANDARD LENGTH[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : IS:2062 (LATEST) GRADE 'A')	18-05-2023
19	Ordnance Equipment Factory	CRATE WOOD PACKING INTERNAL SIZE 407 MM X 457 MM X 2286 MM[21] ( Specification : IS:3071-1981 STYLE NO.5 CLASS 'A' (FROM CHIR WOOD))	14-02-2020
20	Ordnance Equipment Factory	CRATE WOOD PACKING CLASS 'A' STYLE 6. SIZE- 6.60 CM X 6.60 CM X 3.30 CM.[21] ( Specification : AS PER REQUIREMENT AND SPECIFICATION)	14-02-2020
21	Ordnance Equipment Factory	CRATE WOOD PACKING INTERNAL SIZE 62 CM.HX 54.5 CM L X 54.5 CM W AS PER OEF DRG. NO. SK-1166 & IS:3071-1981 CLASS"A" STYLE 6 (FROM CHIR WOOD)[21] ( Specification : AS PER REQUIREMENT AND SPECIFICATION)	14-02-2020
22	Ordnance Equipment Factory	CRATE WOOD PACKING SIZE (INTERNAL) 74 CMX 66 CM X 64 CM. FOR SADDLE PA UNIVERSAL[21] ( Specification : AS PER REQUIREMENT AND SPECIFICATION)	14-02-2020
23	Ordnance Equipment Factory	CRATE WOOD STYLE NO 5, CLASS-A,TO INTERNAL SIZE: 1900 MM L X 215 H X 265 MM W SK-842[21] ( Specification : IS: 3071-1981 (CHIR WOOD))	14-02-2020
24	Ordnance Equipment Factory	CRATE WOOD STYLE NO.5 CLASS B INTERNAL SIZE 50 CM WIDTH X 60 CM LENGTH X 57.50 CM HEIGHT.[21] ( Specification : SPECN.NO. IS:3071-1981)	14-02-2020
25	Ordnance Equipment Factory	PLY WOOD 9PLY/12MM THICK SIZE.210X150 CM TO GRADE WWR-TYPE AA[21] ( Specification : IS: 303-latest)	14-02-2020
26	Ordnance Equipment Factory	PLYWOOD 12. MM THICK (7 PLY)X120 CM X240 CM. GRADE-MR-TYPE AA[21] ( Specification : IS: 303-1989 (WITH AMdt -1))	14-02-2020
27	Ordnance Equipment Factory	PLYWOOD 15.00 MM THICK(10 PLY)X 120 CMX 240 CM. GRADE-WWR-TYPE-AA[21] ( Specification : IS: 303-1989 (WITH AMDT-1 ))	14-02-2020
28	Ordnance Equipment Factory	PLYWOOD 19.00 MM THICK(11PLY)X120 CM X 240CM. GRADE-MR-TYPE-AA[21] ( Specification : IS: 303-1989 (WITH AMDT-1 ))	14-02-2020
29	Ordnance Equipment Factory	PLYWOOD 22.00 MMTHICK(11 PLY)X120CMX240 CM. GRADE-WWR-TYPE-AA[21] ( Specification : IS: 303-1989 (WITH AMDT-1 ))	14-02-2020
30	Ordnance Equipment Factory	PLYWOOD 25.00MM THICK (14PLY)X120CMX 240CM GRADE-MR-TYPE-AA[21] ( Specification : IS: 303-1989 (WITH AMDT-1 ))	14-02-2020
31	Ordnance Equipment Factory	PLYWOOD 6.00MM THICK (5 PLY) X120 CM X 240 CM. GRADE-WWR-TYPE-AA[21] ( Specification : IS: 303-1989 (WITH AMDT-1 ))	14-02-2020
32	Ordnance Equipment Factory	PLYWOOD 7 OR 9 PLY 16 MM THICK 180 CMS X 120CMS MOISTURE PROOF CLASS-I(PHENOLIC RESIN BONDED FOR GEN[21] ( Specification : IS: 303-1975 AMEND. NO. 1&2, SUPP. SCH.CIGS/SS/37(c) BWR GR.AB TYPE)	14-02-2020
33	Ordnance Equipment Factory	PLYWOOD 7 PLY 12 MM THICK X 1500 MM X 750 MM [21] ( Specification : IS:303-1989, REAFF.-1993, 3RD REVISION, AMDT.1 PLYWOOD MR/AA TYPE)	14-02-2020
34	Ordnance Equipment Factory	PLYWOOD BOARD 3 PLY 4MM THICK WWR GRADE TYPE AB. SIZE 240 CMS X 120 CMS[21] ( Specification : IS: 303-1975 SUPPLY SCHEDULE NO.CIGS/SS/37 (B))	14-02-2020
35	Ordnance Equipment Factory	PLYWOOD COMMON GRADE I OR II 3 PLY 5MM THICK TYPE ABWWR GRADE SIZE 120CM X120 CMS[21] ( Specification : AS PER REQUIREMENT & SPECIFICATION)	14-02-2020
36	Ordnance Equipment Factory	PLYWOOD GR. I TYPE AB WWR GRADE 3 PLY 5MM THICK X 210 X 120CM[21] ( Specification : IS: 303 & SUUP SCHEDULE CIGS/SS/37(C))	14-02-2020
37	Ordnance Equipment Factory	PLYWOOD GR. II TYPE BB, WWR GRADE 7 PLY 13 MM THICK SIZE 240CMS X 120 CMS[21] ( Specification : IS: 303-1975)	14-02-2020
38	Ordnance Equipment Factory	PLYWOOD GRADE I TYPE AB,WWR GRADE 7 PLY 13MM THICK X 240 X 120 CM[21] ( Specification : IS: 303 & SUPP.SCHEDULE NO CIGS/SS/37(C))	14-02-2020
39	Ordnance Equipment Factory	PLYWOOD GRADE II TYPE BB,WWR GRADE 5 PLY 9MM THICK 240 X 120 CMS[21] ( Specification : IS: 303 & SUPP. SCHEDULE CIGS/SS/37(C))	14-02-2020
40	Ordnance Equipment Factory	PLYWOOD [21] ( Specification : AS PER REQUIREMENT & SPECIFICATION)	14-02-2020
41	Ordnance Equipment Factory	S.M. SHEET OF VARIOUS DIMENSION[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : IS:513-94 TYPE "D" BEST SURFACE ANNELED, KILLED / SEMI KILLED)	18-05-2023
42	Ordnance Equipment Factory	POLE SIDE ALU. ALLOY COMPLETE ASSEMBLED DRG. NO. CIGS/GS-3/17[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
43	Ordnance Equipment Factory	POLE STANDING ALU. ALLOY COMPLETE ASSEMBLED DRG. NO. CIGS/GS-3/17[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
44	Ordnance Equipment Factory	Tension spring steel .05 mm outer dia 340 mm long galvanised and tampered[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : Best trade quality. The firm must get sample approved from OEF KAnpur)	18-05-2023
45	Ordnance Equipment Factory	HAMMERS VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
46	Ordnance Equipment Factory	BRASS SHEETS OR PLATES VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
47	Ordnance Equipment Factory	DEES STEELS VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT AND SPECIFICATION)	18-05-2023
48	Ordnance Equipment Factory	FOUR WAY MILD STEEL JOINT[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015)	18-05-2023
49	Ordnance Equipment Factory	BUCKLES ALU. ALLOY. OR ATTACHMENTS QR OR RINGS VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
50	Ordnance Equipment Factory	EYELETS ALU. ALLOY VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
51	Ordnance Equipment Factory	EYELETS BRASS VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
52	Ordnance Equipment Factory	SPANNER SINGLE ENDED[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQ.)	18-05-2023
53	Ordnance Equipment Factory	TWISTED PINS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015)	18-05-2023
54	Ordnance Equipment Factory	ALUMINIUM ALLOY BARS VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
55	Ordnance Equipment Factory	ALUMINIUM ALLOY RODS OR ROUNDS VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
56	Ordnance Equipment Factory	ALUMINIUM ALLOY SHEETS OR PLATES VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
57	Ordnance Equipment Factory	ALUMINIUM ALLOY TUBES OR PIPES VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
58	Ordnance Equipment Factory	BUCKLE BRASS OR ATTACHMENTS QR OR RINGS OR DEES VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT AND SPECIFICATION)	18-05-2023
59	Ordnance Equipment Factory	COPPER RODS OR ROUNDS OR WIRES VARIOUS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	18-05-2023
60	Ordnance Equipment Factory	THREE WAY JOINT WITH BASE PLATE FOR TENT EXTENDABLE FRAME[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER NORMS.)	18-05-2023
61	Ordnance Equipment Factory	THREE WAY ROOF POLE MILE STEEL JOINT[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : AS PER TENDER)	18-05-2023
62	Ordnance Equipment Factory	S.M.ANGLE 25X25X3MM IN LENGTH OF 4.75 MTRS[21] (SSA OF MITTAL APPLIANCES LIMITED) ( Specification : SPECN.NO. IS:2062(LATEST) GRADE'A' E-250 (Fe 410W))	18-05-2023
63	Ordnance Equipment Factory	SPRING STEEL STRIP 15 MM X 1 MM THICK[21]P.) (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : IS: 2507-1965 GRADE-1 OR 2)	10-07-2023
64	Ordnance Equipment Factory	SPRING STEEL STRIP 55MM X 1.60 MM THICK[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : IS:2507 GR.4 ANNEALED)	10-07-2023
65	Ordnance Equipment Factory	Spring steel strip 0.5 mm x 40 mm thick[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : as per tender condition)	10-07-2023
66	Ordnance Equipment Factory	spring steel strip 38mm x 1.25mm thick[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : as per tender condition)	10-07-2023
67	Ordnance Equipment Factory	Steel Tube ERW 12.7 mm O/D X 1.22 mm wall thickness[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : Grade Y St 32 of IS : 1161-1968)	10-07-2023
68	Ordnance Equipment Factory	STEEL TUBE SEAMLESS 38 MM *35 MM ID[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : AS PER REQ)	10-07-2023
69	Ordnance Equipment Factory	SPRINGS VARIOUS[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	10-07-2023
70	Ordnance Equipment Factory	SPRING STEEL SHEET 0 POINT 5 MM THICK GRADE I ANNEALED CONDITION[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : IS:2507-1975 (SIZE : 200 X 400 X 0.5 MM THICK))	10-07-2023
71	Ordnance Equipment Factory	STEEL TUBE COLD DRAWN SEAMLESS 26 POINT 9 MM OD X 2 POINT 6 MM W T[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : IS: 3601 , C.D.S. 310)	10-07-2023
72	Ordnance Equipment Factory	STEEL TUBE COLD DRAWN SEAMLESS 32 POINT 4 MM OD X 27 POINT 4 MM ID[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : IS: 3601, C.D.S. 310)	10-07-2023
73	Ordnance Equipment Factory	STEEL TUBE COLD DRAWN SEAMLESS 42 POINT 4 MM[21] (SSA OF MITTAL APPLIANCES LTD. DHAR M.P.) ( Specification : IS: 3601, C.D.S. 310)	10-07-2023
74	Ordnance Equipment Factory	Nickle Coated Snap Fastner (Four Pieces) Spring Type 7/7 with Plastic Washer in Bronzed Black Finish. [21] (SSA OF Mittal Appliance Ltd., Dhar, M.P.) ( Specification : AS PER REQUIREMENT & SPECIFICATION)	05-09-2023
75	Ordnance Equipment Factory	NICKLE COATED SNAP FASTNER(FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER[21 (SSA OF Mittal Appliance Ltd., Dhar, M.P.) ( Specification : IS:4741-1968)	05-09-2023
76	Ordnance Equipment Factory	PRESS BUTTON BRASS NICKLE COATED[21] (SSA OF Mittal Appliance Ltd., Dhar, M.P.) ( Specification : AS PER SPECIFICATION)	05-09-2023
77	Ordnance Equipment Factory	PRESS BUTTON BRASS NICKLE COATED 10 MM[21] (SSA OF Mittal Appliance Ltd., Dhar, M.P.) ( Specification : S.T.S.)	05-09-2023
78	Ordnance Equipment Factory	PRESS BUTTON BRASS NICKLE COATED 15 MM[21] (SSA OF Mittal Appliance Ltd., Dhar, M.P.) ( Specification : AS PER SPECIFICATION)	05-09-2023

Registration No. : 20800209ABHPM4825F1ZL

Conditions of Registration: Normal

This Registration has been carried out based on self-declared documents furnished by Vendor.

Changes, if any, in Address or constitution of the Firm, major Machinery/Equipment or Technology should be intimated to the Registration Authority immediately.

The Registration Authority reserves the right to cancel this Registration Certificate at any time.

Registration is valid for five (5) years per cycle and is subject to automatic renewal unless cancelled on account of an administrative reason.

(Troop Comforts Limited)
(Signature is not required)