Toggle navigation
Troop Comforts Limited
(Centralised Online Vendor Registration Portal)
About TCL
Items open for Registration
Login
Enrollment
Registered Vendors
Debar List
Similar Item Notification
Vendor Registration SOP
CV Norms
FAQ
Help
Warning!
You need to have
JavaScript
enabled to use this site.
Home
Item Master
Item
Item
*
Item Name
*
Factory Name
Select
Ordnance Equipment Factory Hazaratpur
Ordnance Equipment Factory
Ordnance Clothing Factory Shahjahanpur
Ordnance Clothing Factory Avadi
Ordnance Cable Factory Chandigarh
*
Item Description
LDPE SHEET FOR PEAK INTERLINING (OP/IP : 280 X 200 MM)
*
Item Specification
LDPE SHEET FOR PEAK INTERLINING (OP/IP:280X200MM) PROV.SPECIFICATION No.S/5094/TC-1(b)/Cap Bal OG (Imp) Appendix'B' to JSS:8405-25:2010 APPENDIX B(TEX-1/1299/82/1) The LDPE sheet shall be made from virgin material and shall be free from the holes, embedded foreign matters, surface imperfections, cuts and other defects. Requirements: LDPE Sheet shall conform to the following req. i) Material - Low Density Virgin Polyethylene ii) Density Apparent (g/ml) - 0.95 iii) Tensile Strength (Newton/cm2) - 830 min iv) Elongation at break (%) - 125 min v) Thickness (under 200g/cm2 load, mm) - 1.7 +/- 0.1 vi) Mass (Kg/m2) - 1.6 +/- 0.1
Item Drawing Number
*
Manufacturing Technology
LDPE SHEET FOR PEAK INTERLINING (OP/IP:280X200MM) PROV.SPECIFICATION No.S/5094/TC-1(b)/Cap Bal OG (Imp) Appendix'B' to JSS:8405-25:2010 APPENDIX B(TEX-1/1299/82/1) The LDPE sheet shall be made from virgin material and shall be free from the holes, embedded foreign matters, surface imperfections, cuts and other defects. Requirements: LDPE Sheet shall conform to the following req. i) Material - Low Density Virgin Polyethylene ii) Density Apparent (g/ml) - 0.95 iii) Tensile Strength (Newton/cm2) - 830 min iv) Elongation at break (%) - 125 min v) Thickness (under 200g/cm2 load, mm) - 1.7 +/- 0.1 vi) Mass (Kg/m2) - 1.6 +/- 0.1
*
Testing / Inspection Facility
LDPE SHEET FOR PEAK INTERLINING (OP/IP:280X200MM) PROV.SPECIFICATION No.S/5094/TC-1(b)/Cap Bal OG (Imp) Appendix'B' to JSS:8405-25:2010 APPENDIX B(TEX-1/1299/82/1) The LDPE sheet shall be made from virgin material and shall be free from the holes, embedded foreign matters, surface imperfections, cuts and other defects. Requirements: LDPE Sheet shall conform to the following req. i) Material - Low Density Virgin Polyethylene ii) Density Apparent (g/ml) - 0.95 iii) Tensile Strength (Newton/cm2) - 830 min iv) Elongation at break (%) - 125 min v) Thickness (under 200g/cm2 load, mm) - 1.7 +/- 0.1 vi) Mass (Kg/m2) - 1.6 +/- 0.1
Drawing File
Specification File
1752053946_8095b50f3edc34a48848.pdf
*
Manufacturing Technology Files
1752053946_161c16f4f31c14f28fef.pdf
*
Testing / Inspection Facility Files
1752053946_040aba6442251c766d7c.pdf
Update
Back
