Troop Comforts Limited
A Government of India Enterprise
Ministry of Defence
TCL Corporate Bhawan, G.T. Road, Kanpur, (U.P)-208013
Ministry of Defence
TCL Corporate Bhawan, G.T. Road, Kanpur, (U.P)-208013
Phone: 0512-2451781-82 | Email: info@troopcomfortslimited.co.in
REGISTRATION CERTIFICATE
This is to certify that M/S SUNEEL AND COMPANY, 4/22 purana kanpur, Pin-208002 is registered at Troop Comforts Limited for following Items.
| Sr No | Factory/ Unit | Item Nomenclature | Registration Date |
|---|---|---|---|
| 1 | Ordnance Equipment Factory Hazaratpur | Fabrication of Carrier Main Pack MK-1
( Stitching & fitting of Garniture items as per latest specification governing by AHSPr latest specification governing by AHSP) (Approved For Frame of Carrier man pack ) |
12-06-2024 |
| 2 | Ordnance Equipment Factory Hazaratpur | ATTACHMENT RING STRAP RELEASE
(AS PER SPECIFCATION NO. IND/GS/1797 (a) DS CAT NO. 1670-000283) |
28-01-2026 |
| 3 | Ordnance Clothing Factory Avadi | 8340 001120 UNIVERSAL MEMBER ALUMINIUM ALLOY FOR TENT EXTENDABLE FRAME SUPPORTED[21]
( Specification : AS PER SPECIFICATION) |
30-09-2020 |
| 4 | Ordnance Clothing Factory Avadi | ROOF POLE WITHOUT THREE WAY JOINT FOR TENT EXTENDABLE FRAME SUPPORTER[21]
( Specification : Item code : [2111651005] [ROOF POLE FOR TEFS 4M Spcns. : [8340-001119, ROOF POLE WITHOUT THREE WAY JOINT FOR [TENT EXTENDABLE FRAME SUPPORTED. [SPECIFICATION : U/S SPEC) |
30-09-2020 |
| 5 | Ordnance Clothing Factory Avadi | PEAK POLYETHYLENE
(AS PER ENCLOSED SPECIFICATION) |
09-12-2024 |
| 6 | Ordnance Clothing Factory Avadi | LDPE SHEET FOR PEAK INTERLINING (OP/IP : 280 X 200 MM)
(LDPE SHEET FOR PEAK INTERLINING (OP/IP:280X200MM) PROV.SPECIFICATION No.S/5094/TC-1(b)/Cap Bal OG (Imp) Appendix'B' to JSS:8405-25:2010 APPENDIX B(TEX-1/1299/82/1) The LDPE sheet shall be made from virgin material and shall be free from the holes, embedded foreign matters, surface imperfections, cuts and other defects. Requirements: LDPE Sheet shall conform to the following req. i) Material - Low Density Virgin Polyethylene ii) Density Apparent (g/ml) - 0.95 iii) Tensile Strength (Newton/cm2) - 830 min iv) Elongation at break (%) - 125 min v) Thickness (under 200g/cm2 load, mm) - 1.7 +/- 0.1 vi) Mass (Kg/m2) - 1.6 +/- 0.1 ) |
12-08-2025 |
| 7 | Ordnance Clothing Factory Avadi | PLASTIC TOGGLE BLACK (BELL CAP)
(AS PER ENCLOSED DRAWING ) |
09-04-2026 |
| 8 | Ordnance Equipment Factory | Tension spring steel .05 mm outer dia 340 mm long galvanised and tampered[21]
( Specification : Best trade quality. The firm must get sample approved from OEF KAnpur) |
09-10-2017 |
| 9 | Ordnance Equipment Factory | BRASS HOOKS FOR HIGH ANKLE BOOT DVS[21]
( Specification : IS:5041-2001 & APPENDIX "G" OF IND/TC/3844) |
29-04-2018 |
| 10 | Ordnance Equipment Factory | BUCKLE BRASS 25MM W.E.[21]
( Specification : SPECN. NO. IND/GS/1541 (5627/PK)) |
29-04-2018 |
| 11 | Ordnance Equipment Factory | BUCKLE BRASSOLLER DOUBLE 25MM BRONGE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
29-04-2018 |
| 12 | Ordnance Equipment Factory | BUCKLE IRON ROLLER SINGLE 32MM TD.[21]
( Specification : SPECN. NO. IND/GS/377 (d) (2757/PK)) |
29-04-2018 |
| 13 | Ordnance Equipment Factory | CLIP END STRAP BRASS 19MM[21]
( Specification : IND/GS/1541 (5627/PK DT. 21.9.1990)) |
29-04-2018 |
| 14 | Ordnance Equipment Factory | CLIP END STRAP BRASS 25MM[21]
( Specification : IND/GS/1541 (5627/PK DT. 21.9.1990)) |
29-04-2018 |
| 15 | Ordnance Equipment Factory | D. RING 18 MM FOR BAG WATER PROOF[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
29-04-2018 |
| 16 | Ordnance Equipment Factory | DEES STEEL 25MMX20MMX4MM GALVENISED[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
29-04-2018 |
| 17 | Ordnance Equipment Factory | DEES STEEL 38 MM X 32 MM X 4 MM - A.F.[21]
( Specification : CQA(GS)/US/426(A)) |
29-04-2018 |
| 18 | Ordnance Equipment Factory | Dees Brass Side Bar Complete[21]
( Specification : Drawing No. IND/GS/2402/ & specn. no. IND/GS/572( c)) |
29-04-2018 |
| 19 | Ordnance Equipment Factory | EYELET ALU. ALLOY (CHEMICALY PASSIVATED) NO.24 WITH TURNOVER WASHER[21]
( Specification : IS:4084-1978 (1st Revision) (Amendment No. 2), Reaffirmed 1991 and Supp. Schedule No. CIGS/SS/260 (B)) |
29-04-2018 |
| 20 | Ordnance Equipment Factory | EYELET BRASS NO.28 WITH TURN OVER WASHER[21]
( Specification : IS:4084-1978 (1ST.REVISION) AMENDMENT NO.2,REAFFIRMED 1991.) |
29-04-2018 |
| 21 | Ordnance Equipment Factory | Eyelet Aluminium Alloy Chemically Passivated No. 28 with Turn Over Washer[21]
( Specification : IS:4084-1978 (1st Revision) (Amendment No.-2) Reaffirmed 1991 & Supply Schedule No. CQA(GS)/SS/335) |
29-04-2018 |
| 22 | Ordnance Equipment Factory | HAMMER ENEINEERING BALL PIN 1 KG. FITTED WITH HANDLE[21]
( Specification : IS:841(LATEST) & SUPP. SCH.NO. CQA(GS)/SS/337(b) (5625/PK) AND AS IN TE.) |
29-04-2018 |
| 23 | Ordnance Equipment Factory | HOOK IRON[21]
( Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.03) EXCEPT) |
29-04-2018 |
| 24 | Ordnance Equipment Factory | HOOKS BRASS 57 MM[21]
( Specification : IND/GS/1541 (5627/PK DT. 19.02.2001)) |
29-04-2018 |
| 25 | Ordnance Equipment Factory | PIN TENT ANGLE IRON MED. MK-2[21]
( Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986) |
29-04-2018 |
| 26 | Ordnance Equipment Factory | PIN TENT CARBON STEEL SMALL 8340-000508[21]
( Specification : IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED) |
29-04-2018 |
| 27 | Ordnance Equipment Factory | SHANK STEEL RIBBED (RUST PROOF)[21]
( Specification : AS PER DRG. ATTACHED TO SPECN. NO.IND/TC/3838(J) (5511/PK DT) |
29-04-2018 |
| 28 | Ordnance Equipment Factory | Shelter Port No. 3 Structure Member Roof Intermediate[21]
( Specification : Drg. No. 7711/PK & 7712/PK dtd. 28.06.2003) |
29-04-2018 |
| 29 | Ordnance Equipment Factory | TWISTED PINS[21]
( Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015) |
29-04-2018 |
| 30 | Ordnance Equipment Factory | Tension spring steel .05 mm outer dia 340 mm long galvanised and tampered[21]
( Specification : Best trade quality. The firm must get sample approved from OEF KAnpur) |
29-04-2018 |
| 31 | Ordnance Equipment Factory | WASHER COPPER HOSE TINNED 3.5MM I/D X 10 MM O/D[21]
( Specification : IND/GS/36(A)) |
29-04-2018 |
| 32 | Ordnance Equipment Factory | 'D' RING 19 MM NICKLE PLATED *10.5MM*2MM DIA(FOR POUCHES AMMUN.) SYNTHETIC[21]
( Specification : AS PER REQUIREMENT) |
11-09-2019 |
| 33 | Ordnance Equipment Factory | ATTACHMENT 'V' GIRTH OFF COMPLETE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 34 | Ordnance Equipment Factory | BAGS MADE OF JUTE C CLOTH SIZE 34" X 28" WITH 2 SIDE STITCHED AND ONE SIDE LEFT OPEN[21]
( Specification : AS PER SPEC) |
11-09-2019 |
| 35 | Ordnance Equipment Factory | BRASS HOOKS FOR HIGH ANKLE BOOT DVS[21]
( Specification : IS:5041-2001 & APPENDIX "G" OF IND/TC/3844) |
11-09-2019 |
| 36 | Ordnance Equipment Factory | BREACHING PA LONG MK- III COMPLETE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 37 | Ordnance Equipment Factory | BUCKLE BRASS 25MM W.E.[21]
( Specification : SPECN. NO. IND/GS/1541 (5627/PK)) |
11-09-2019 |
| 38 | Ordnance Equipment Factory | BUCKLE BRASSOLLER DOUBLE 25MM BRONGE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 39 | Ordnance Equipment Factory | BUCKLE IRON ROLLER SINGLE 32MM TD.[21]
( Specification : SPECN. NO. IND/GS/377 (d) (2757/PK)) |
11-09-2019 |
| 40 | Ordnance Equipment Factory | Bag Nose Large Complete[21]
( Specification : AS PER REQUIREMENT & SPECIFICTAION) |
11-09-2019 |
| 41 | Ordnance Equipment Factory | CAPS KNEE COMPLETE[21]
( Specification : IND/TC/3263(c) NOTE : F.O.T . SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY) |
11-09-2019 |
| 42 | Ordnance Equipment Factory | CLIP END STRAP BRASS 19MM[21]
( Specification : IND/GS/1541 (5627/PK DT. 21.9.1990)) |
11-09-2019 |
| 43 | Ordnance Equipment Factory | CLIP END STRAP BRASS 25MM[21]
( Specification : IND/GS/1541 (5627/PK DT. 21.9.1990)) |
11-09-2019 |
| 44 | Ordnance Equipment Factory | COLLAR HEAD PA COMPLETE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 45 | Ordnance Equipment Factory | COLLAR HEAD PGS LARGE MK I COMPLETE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 46 | Ordnance Equipment Factory | COLLAR HEAD PGS SMALL MK-I COMPLETE.[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 47 | Ordnance Equipment Factory | COLLER BREAST PGS MK-II NO. 1 COMPLETE[21]
( Specification : IND/GS/1545 (A)) |
11-09-2019 |
| 48 | Ordnance Equipment Factory | CRUPPER PA LARGE COMPLETE[21]
( Specification : IND/GS/1576) |
11-09-2019 |
| 49 | Ordnance Equipment Factory | CRUPPER PGS NO. 1 COMPLETE[21]
( Specification : IND/GS/1575 (A)) |
11-09-2019 |
| 50 | Ordnance Equipment Factory | CRUPPER PGS NO. 1 DOCK COMPLETE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 51 | Ordnance Equipment Factory | D. RING 18 MM FOR BAG WATER PROOF[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 52 | Ordnance Equipment Factory | DEES STEEL 25MMX20MMX4MM GALVENISED[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
11-09-2019 |
| 53 | Ordnance Equipment Factory | DEES STEEL 38 MM X 32 MM X 4 MM - A.F.[21]
( Specification : CQA(GS)/US/426(A)) |
11-09-2019 |
| 54 | Ordnance Equipment Factory | DEES STEEL 38MMX32MMX4MM[21]
( Specification : SPECN.NO. CQA(GS)/US/426(a) EXCEPT SIZE (5757/PK),EXCEPT) |
11-09-2019 |
| 55 | Ordnance Equipment Factory | Dees Brass Side Bar Complete[21]
( Specification : Drawing No. IND/GS/2402/ & specn. no. IND/GS/572( c)) |
11-09-2019 |
| 56 | Ordnance Equipment Factory | EYELET ALU. ALLOY (CHEMICALY PASSIVATED) NO.24 WITH TURNOVER WASHER[21]
( Specification : IS:4084-1978 (1st Revision) (Amendment No. 2), Reaffirmed 1991 and Supp. Schedule No. CIGS/SS/260 (B)) |
11-09-2019 |
| 57 | Ordnance Equipment Factory | EYELET BRASS NO.21 WITH PLAIN WASHER BRONZED BLACK[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
11-09-2019 |
| 58 | Ordnance Equipment Factory | EYELET BRASS NO.28 WITH TURN OVER WASHERBRONZED BLACK[21]
( Specification : IS:4084-1978,REAFFIRMED 2013,AMDS 2.) |
11-09-2019 |
| 59 | Ordnance Equipment Factory | EYELET BRASS NO.28 WITH TURN OVER WASHER[21]
( Specification : IS:4084-1978 (1ST.REVISION) AMENDMENT NO.2,REAFFIRMED 1991.) |
11-09-2019 |
| 60 | Ordnance Equipment Factory | Eyelet Aluminium Alloy Chemically Passivated No. 28 with Turn Over Washer[21]
( Specification : IS:4084-1978 (1st Revision) (Amendment No.-2) Reaffirmed 1991 & Supply Schedule No. CQA(GS)/SS/335) |
11-09-2019 |
| 61 | Ordnance Equipment Factory | FRINGES BROW BAND COTTON 2 MM DIA BLUE[21]
( Specification : IND/GS/3357 (H)) |
11-09-2019 |
| 62 | Ordnance Equipment Factory | FROG BROWN KUKREE MK-2 COMPLETE[21]
( Specification : SPECIFICATION NO. JSS:8465-17 FEB.81 NOTE: F.O.T SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY.) |
11-09-2019 |
| 63 | Ordnance Equipment Factory | GIRTH PA LONG COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
11-09-2019 |
| 64 | Ordnance Equipment Factory | GIRTH PA SHORT COMPLETE[21]
( Specification : IND/GS/645 (D)) |
11-09-2019 |
| 65 | Ordnance Equipment Factory | GIRTH S.U.LARGE MK2 COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
11-09-2019 |
| 66 | Ordnance Equipment Factory | GIRTH SU MEDIUM MK-2 COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
11-09-2019 |
| 67 | Ordnance Equipment Factory | HAMMER ENEINEERING BALL PIN 1 KG. FITTED WITH HANDLE[21]
( Specification : IS:841(LATEST) & SUPP. SCH.NO. CQA(GS)/SS/337(b) (5625/PK) AND AS IN TE.) |
11-09-2019 |
| 68 | Ordnance Equipment Factory | HEAD STALL G.S. COMPLETE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 69 | Ordnance Equipment Factory | HOOK IRON[21]
( Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.03) EXCEPT) |
11-09-2019 |
| 70 | Ordnance Equipment Factory | HOOKS BRASS 57 MM[21]
( Specification : IND/GS/1541 (5627/PK DT. 19.02.2001)) |
11-09-2019 |
| 71 | Ordnance Equipment Factory | NETS CAMOUFLAGE HEAD DRESS OG MK-2[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 72 | Ordnance Equipment Factory | PANNEL P A[21]
( Specification : IND/GS/1225(B)) |
11-09-2019 |
| 73 | Ordnance Equipment Factory | PANNEL PGS NO. 1[21]
( Specification : IND/GS/1269(C) ) |
11-09-2019 |
| 74 | Ordnance Equipment Factory | PANNEL PGS NO. 2 [21]
( Specification : IND/GS/1269(C) (4712/PK DT.08.06.86) ) |
11-09-2019 |
| 75 | Ordnance Equipment Factory | PANNEL PGS STRAP NO. 2 COMPLETE[21]
( Specification : IND/GS/1269 (C)) |
11-09-2019 |
| 76 | Ordnance Equipment Factory | PANNEL PGS STRAP SHORT COMPLETE[21]
( Specification : IND/GS/1269 (C)) |
11-09-2019 |
| 77 | Ordnance Equipment Factory | PIN TENT ANGLE IRON MED. MK-2[21]
( Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986) |
11-09-2019 |
| 78 | Ordnance Equipment Factory | PIN TENT CARBON STEEL SMALL 8340-000508[21]
( Specification : IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED) |
11-09-2019 |
| 79 | Ordnance Equipment Factory | Rope Baggage MK 1[21]
( Specification : ----) |
11-09-2019 |
| 80 | Ordnance Equipment Factory | SHANK STEEL RIBBED (RUST PROOF)[21]
( Specification : AS PER DRG. ATTACHED TO SPECN. NO.IND/TC/3838(J) (5511/PK DT) |
11-09-2019 |
| 81 | Ordnance Equipment Factory | STRAP GIRTH PA MK-2 COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
11-09-2019 |
| 82 | Ordnance Equipment Factory | STRAP GIRTH PGS NO. 1 COMPLETE[21]
( Specification : IND/GS/1593) |
11-09-2019 |
| 83 | Ordnance Equipment Factory | STRAP NECK COMPLETE[21]
( Specification : IND/GS/1885 ) |
11-09-2019 |
| 84 | Ordnance Equipment Factory | STRAP RETAINING EYE (SET CONSITS OF TWO NOS)[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
11-09-2019 |
| 85 | Ordnance Equipment Factory | STRAP SUPPORTING BREECHING PA COMPLETE[21]
( Specification : IND/GS/1332 (C) ) |
11-09-2019 |
| 86 | Ordnance Equipment Factory | STRAPS WITH CONNECTING PIECE & BUCKLE COMPLETE FOR VALISES OFFICER MK-II COMPLETE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 87 | Ordnance Equipment Factory | Shelter Port No. 3 Structure Member Roof Intermediate[21]
( Specification : Drg. No. 7711/PK & 7712/PK dtd. 28.06.2003) |
11-09-2019 |
| 88 | Ordnance Equipment Factory | TENT RING IG 12.5 MM[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 89 | Ordnance Equipment Factory | TWISTED PINS[21]
( Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015) |
11-09-2019 |
| 90 | Ordnance Equipment Factory | Tension spring steel .05 mm outer dia 340 mm long galvanised and tampered[21]
( Specification : Best trade quality. The firm must get sample approved from OEF KAnpur) |
11-09-2019 |
| 91 | Ordnance Equipment Factory | WASHER COPPER HOSE TINNED 3.5MM I/D X 10 MM O/D[21]
( Specification : IND/GS/36(A)) |
11-09-2019 |
| 92 | Ordnance Equipment Factory | WASHERS BRASS VARIOUS[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 93 | Ordnance Equipment Factory | WASHERS COPPER VARIOUS[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
11-09-2019 |
| 94 | Ordnance Equipment Factory | CUT COMPONENTS COLLAR HEAD PA HEAD PIECES[21]
( Specification : IND/GS/1747) |
25-06-2020 |
| 95 | Ordnance Equipment Factory | CUT COMPONENTS COLLAR HEAD SU HEAD PIECES[21]
( Specification : IND/GS/1763) |
25-06-2020 |
| 96 | Ordnance Equipment Factory | GIRTH PA LONG COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
25-06-2020 |
| 97 | Ordnance Equipment Factory | GIRTH S.U.LARGE MK2 COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
25-06-2020 |
| 98 | Ordnance Equipment Factory | GIRTH SU MEDIUM MK-2 COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
25-06-2020 |
| 99 | Ordnance Equipment Factory | ROPE LOADING 18.3 MTRS. COMPLETE[21]
( Specification : JSS - 03-03-01 FEB., 1970) |
25-06-2020 |
| 100 | Ordnance Equipment Factory | CAPS KNEE COMPLETE[21]
( Specification : IND/TC/3263(c) NOTE : F.O.T . SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY) |
25-06-2020 |
| 101 | Ordnance Equipment Factory | STRAP GIRTH PA MK-2 COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
25-06-2020 |
| 102 | Ordnance Equipment Factory | ROPE HEEL 3.2 MTRS COMPLETE[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
25-06-2020 |
| 103 | Ordnance Equipment Factory | POLE SIDE ALU. ALLOY COMPLETE ASSEMBLED DRG. NO. CIGS/GS-3/17[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
02-11-2020 |
| 104 | Ordnance Equipment Factory | POLE STANDING ALU. ALLOY COMPLETE ASSEMBLED DRG. NO. CIGS/GS-3/17[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
02-11-2020 |
| 105 | Ordnance Equipment Factory | HAMMER SLADGE DOUBLE FACED 2 KG. WITH HANDLE[21]
( Specification : IS:841-1983 & SUPPL. SCH. CQA(GS)/SS/337(b) (5625/PK) AND AS IN TE.) |
02-11-2020 |
| 106 | Ordnance Equipment Factory | FOUR WAY MILD STEEL JOINT[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
02-11-2020 |
| 107 | Ordnance Equipment Factory | THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
02-11-2020 |
| 108 | Ordnance Equipment Factory | THREE WAY ROOF POLE MILE STEEL JOINT[21]
( Specification : AS PER TENDER) |
02-11-2020 |
| 109 | Ordnance Equipment Factory | POLE STANDING ALUMINIUM ALLOY COMPLETE[21]
( Specification : Specn. No. IND/GS/1587) |
10-12-2020 |
| 110 | Ordnance Equipment Factory | DEES IRON 22MM x 19MM x 4MM[21]
( Specification : CQA (GS) /US/426 (a) Except Dimensions) |
07-01-2021 |
| 111 | Ordnance Equipment Factory | Ring Iron 13MM X 3 MM DIA galvanized Wire[21]
( Specification : IS: 280) |
07-01-2021 |
| 112 | Ordnance Equipment Factory | TENT DEES 206 MM x 130MM x 5 MM[21]
( Specification : CQA(GS)/US/426 (a) Except Size (5757/Pk) Galvanized) |
07-01-2021 |
| 113 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FIXING OF PLY WITH NAILING FINISHING AND HINGE FIXING OF SKID BOARD MI 8[21]
( Specification : Specn No. IND/GS/1726 (c)) |
07-01-2021 |
| 114 | Ordnance Equipment Factory | Toggle Cord Stopper[21]
( Specification : Prov. Specification No. S/6421/Bag Sleeping Lt Wt/TC-6) |
07-01-2021 |
| 115 | Ordnance Equipment Factory | Trade assistance for Frame of Skid Board MI 8[21]
( Specification : Specn No. IND/GS/1726 (c)) |
07-01-2021 |
| 116 | Ordnance Equipment Factory | DEES STEELS VARIOUS[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
07-01-2021 |
| 117 | Ordnance Equipment Factory | CLIP IRON (FOR TENT EXTENDABLE)[21]
( Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED) |
07-01-2021 |
| 118 | Ordnance Equipment Factory | TENT DEES IRON 25MM X 20MM X 4MM[21]
( Specification : IND/GS/1416) |
07-01-2021 |
| 119 | Ordnance Equipment Factory | CHAPE AND LINK ASSEMBLY COMPLETE[21]
( Specification : Specn. No. IND/GS/1726 ( C)) |
14-01-2021 |
| 120 | Ordnance Equipment Factory | Trade Assistance for Stuffed Wrapped And Strung in TAM[21]
( Specification : Specn No.-IND/GS/1587) |
10-02-2021 |
| 121 | Ordnance Equipment Factory | Trade assistance of Pole Door of Tent Arctic Medium[21]
( Specification : Spcn No. IND/GS/0824(a) & IND/GS/1587) |
25-02-2021 |
| 122 | Ordnance Equipment Factory | Trade assistance for Final Welding of Short Elbow Door Door Clip Legs Bottom plate and Stay Bars with HSOB Body[21]
( Specification : Specn No. IND/GS/1691 (a)) |
10-03-2021 |
| 123 | Ordnance Equipment Factory | Trade assistance for Fabrication of Adopter Nut[21]
( Specification : IND/GS/1691 (a)) |
08-05-2021 |
| 124 | Ordnance Equipment Factory | Trade assistance for Fabrication of Bend Pipe[21]
( Specification : IND/GS/1691 (a)) |
08-05-2021 |
| 125 | Ordnance Equipment Factory | Trade assistance for Fabrication of Gland Nut[21]
( Specification : IND/GS/1691(a)) |
08-05-2021 |
| 126 | Ordnance Equipment Factory | Trade assistance for Fabrication of Hose Union[21]
( Specification : IND/GS/1691 (a)) |
08-05-2021 |
| 127 | Ordnance Equipment Factory | Trade assistance for Fabrication of M S Pipe[21]
( Specification : IND/GS/1691 (a)) |
08-05-2021 |
| 128 | Ordnance Equipment Factory | Trade assistance of Fabrication of Union Nut[21]
( Specification : IND/GS/1691 (a)) |
08-05-2021 |
| 129 | Ordnance Equipment Factory | TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
29-06-2021 |
| 130 | Ordnance Equipment Factory | Cast acrylic Sheet Transparent Polymethyl[21]
( Specification : Specn No. IND/GS/1589 (6003/PK) and IS:7569-1987 (Methacrylate Sheet)) |
29-06-2021 |
| 131 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FIXING OF PLY WITH NAILING FINISHING AND HINGE FIXING OF SKID BOARD MI 8[21]
( Specification : Specn No. IND/GS/1726 (c)) |
29-06-2021 |
| 132 | Ordnance Equipment Factory | "RIVETS COPPER VARIOUS[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
14-07-2021 |
| 133 | Ordnance Equipment Factory | RIVET STEEL FLAT HEAD 3.15MM DIA X 8MM LONG[21]
( Specification : IS:2998-LATEST) |
14-07-2021 |
| 134 | Ordnance Equipment Factory | DEMI BANDEROL BEACON BANDEROL SET ASSY B COMPLETE[21]
( Specification : DRAWING NO.- IND/GS/568(K) & SUPP. SCH. NO. CQA(GS)SS/411(A)) |
14-07-2021 |
| 135 | Ordnance Equipment Factory | PLATEFORM CARGO AERIAL DEL FOR AN 32 AIRCRAFT1508 x 829 MM COMPLETE[21]
( Specification : SPECN. NO. IND/GS/1764 (A) ( 7192/PK)) |
14-07-2021 |
| 136 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE DOOR[21]
( Specification : SPEC. NO.: IND/GS/1587) |
14-07-2021 |
| 137 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE STANDING[21]
( Specification : SPEC. NO.: IND/GS/1587) |
14-07-2021 |
| 138 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF PIN LARGE OF POLE STANDING[21]
( Specification : SPEC. NO.: IND/GS/1587) |
14-07-2021 |
| 139 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF PIN OF POLE DOOR[21]
( Specification : SPEC. NO.: IND/GS/1587) |
14-07-2021 |
| 140 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF PIN SMALL OF POLE STANDING[21]
( Specification : SPEC. NO.: IND/GS/1587) |
14-07-2021 |
| 141 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE DOOR[21]
( Specification : SPEC. NO.: IND/GS/1587) |
14-07-2021 |
| 142 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE STANDING[21]
( Specification : SPEC. NO.: IND/GS/1587) |
14-07-2021 |
| 143 | Ordnance Equipment Factory | FABRICATION OF BELT WAIST ICK
(IND/TC/1550) |
09-12-2024 |
| 144 | Ordnance Equipment Factory | POLYTHENE BAG VARIOUS SIZES
(IS:9738-2003) |
01-10-2025 |
(Troop Comforts Limited)
(Signature is not required)