TCL
Troop Comforts Limited
A Government of India Enterprise
Ministry of Defence
TCL Corporate Bhawan, G.T. Road, Kanpur, (U.P)-208013
Phone: 0512-2451781-82 | Email: info@troopcomfortslimited.co.in

REGISTRATION CERTIFICATE

This is to certify that M/S Eastern Global Limited, 517,CITY CENTRE, THE MALL, KANPUR, Pin-208001 is registered at Troop Comforts Limited for following Items.

Sr No Factory/ Unit Item Nomenclature Registration Date
1 Ordnance Equipment Factory "D" RING (MS WIRE) 25MM CR/NICKLE PLATED
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
2 Ordnance Equipment Factory "D" RING 19 MM NICKLE PLATED (FOR POUCHESAMMUNITION SYNTHETIC WEB EQUIPMENT)
(DMSRDE/T&GS/99/440 .) 		19-11-2010
3 Ordnance Equipment Factory "D" RING 19 MM NIKCLE PLATED X 10.5 MM X 2 MM DIA (FOR POUCHES AMMUN.) SYNTHETIC WEB EQUPT.
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
4 Ordnance Equipment Factory "D" RING 30 MM DIA NICKLE PLATED
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
5 Ordnance Equipment Factory "D" RING FOR BAG HARNESS (BBD) SIZE 28 MM X 20 MM
(DRG. NO.SK-1191) 		19-11-2010
6 Ordnance Equipment Factory "D" RING FOR BAG HARNESS (BBD) SIZE 36 MM X 12 MM
(DRG.NO.SK-1191) 		19-11-2010
7 Ordnance Equipment Factory "D" RING MS NICKLE PLATED 22 MM X 19 MM X 4 MM DIA
(DMSRDE/T&GS/85/325 (b) PLATE 8) 		19-11-2010
8 Ordnance Equipment Factory "D" RING STEEL TO BS:970 PT.1-1983 GD.080 M 40
(Drawing as per matl.3 of drawing no. SK-1197) 		19-11-2010
9 Ordnance Equipment Factory "U" PIN
(CQA(GS)/US/467(B),CADMIUM PLATED AS PER IS:1572-1986) 		19-11-2010
10 Ordnance Equipment Factory 8340-001117, FOUR WAY JOINT FOR TENT EXTENDABLE FRAME SUPPORTED
(UNSEALED SPECN.NO. CQA(GS)/US/467(d) (5986/PK DT. 13.2.2009)) 		19-11-2010
11 Ordnance Equipment Factory 8340-01116,THREE WAY JOINT WITH BASE PLATE FOR TENT EXTANDABLE FRAME SUPPORTED
(IS: 617 DESIGN 5500 SOLUTION TREATED (W) CONDITION DULY) 		19-11-2010
12 Ordnance Equipment Factory ALUMINIUM INGOT DESIGN. A-0
(IS:617-1959) 		19-11-2010
13 Ordnance Equipment Factory ALUMINIUM WASHER FOR EYLET NO. 18
(IS: 4084 -78 CIGS/SS/335) 		19-11-2010
14 Ordnance Equipment Factory ALUMINIUM WASHER PLAIN NO.18 BLACK ANODISED
(IS:4084-1978) 		19-11-2010
15 Ordnance Equipment Factory BAMBOO MALE SEASONED 15 MM DIA X 55 CM LONG
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
16 Ordnance Equipment Factory BAMBOO MALE SEASONED 19 MM DIA X 70 CMS LONG
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
17 Ordnance Equipment Factory BAMBOO MALE SEASONED 27 MM DIA X 60 CM LONG
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
18 Ordnance Equipment Factory BAMBOO MALE SIZE 20 MMX 50 CM LONG
(IND/GS/1157(B)) 		19-11-2010
19 Ordnance Equipment Factory BAMBOO MALE SOLID 5CMSX 2.5M LONG
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
20 Ordnance Equipment Factory BAMBOO POLE 1.34 M X 2.54 CM DIA CROSS END
(G/TEX/T-1G CLAUSE- 17 AND DRG NO.CLO/3C/5) 		19-11-2010
21 Ordnance Equipment Factory BAMBOO POLE W P RIGHT 22.3 MM DIA X 890 MM LONG CROSS END
(G/TEX/T-1 G CLAUSE 17) 		19-11-2010
22 Ordnance Equipment Factory BAMBOO RIDGE POLE JOINTED& SOCKETTED 60 MM TO 63 MM DIA X 3.05 M LONG
(G/TEX/T-1G CLAUSE-7 & 8 AND DRG NO. CLO/3C/5) 		19-11-2010
23 Ordnance Equipment Factory BAMBOO STANDING POLE JOINTED & SOCKETTED 60 MM 63 MM DIA X 2.90 M.LONG FIXED WITHTURK HEAD NET
(G/TEX/T-1G CLAUSE-7 & 8 AND DRG NO. CLO/3C/5) 		19-11-2010
24 Ordnance Equipment Factory BOLTS & NUTS STEEL VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
25 Ordnance Equipment Factory BRASS HOOKS FOR HIGH ANKLE BOOT DVS
(IS:5041-2001 & APPENDIX "G" OF IND/TC/3844) 		19-11-2010
26 Ordnance Equipment Factory BUCKET LARGE RING STEEL LARGE
(DRG. NO. IND/GS/1427(d) (686/PK)) 		19-11-2010
27 Ordnance Equipment Factory BUCKET LARGE RING STEEL SMALL
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
28 Ordnance Equipment Factory BUCKLES ALU. ALLOY. OR ATTACHMENTS QR OR RINGS VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
29 Ordnance Equipment Factory BUCKLES BRASS OR ATTACHMENTS QR OR RINGS OR DEES VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
30 Ordnance Equipment Factory BUCKLES IRON VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
31 Ordnance Equipment Factory CATCH ASSEMBLED WITH HOOK NICKLE CROME PLATED
(TO D.S. CAT NO.1005-006573 & NICKLE CROME) 		19-11-2010
32 Ordnance Equipment Factory CATCH STEEL TO IS:7226-C 40 HARDNESS 250 TO 300 H.V.
(Drawing as per matl. 2 of drawing no. SK-1197) 		19-11-2010
33 Ordnance Equipment Factory CHAIN 11 LINK WITH DEES, CHAPES & PIN
(DRG. NO. SK-1135) 		19-11-2010
34 Ordnance Equipment Factory CHAIN 28 LINK WITH DEES & CHPAES
(DRG. NO. SK-1136) 		19-11-2010
35 Ordnance Equipment Factory CHAIN FOR POLE DOOR ALUMINIUM ALLOY DRG NO. SK-1000
(IS:1572-1986 GR. B TYPE-2 FOR CADMIUM PLATING) 		19-11-2010
36 Ordnance Equipment Factory CHAIN FOR POLE STANDING ALUMINIUM ALLOY. DRG.NO.SK-1001
(IS: 1572-1986 GR. B TYPE-2 FOR CADMIUM PLATING) 		19-11-2010
37 Ordnance Equipment Factory CHAIN IRON OR STEEL WELDLESS NO. 12 SWG (GALVANIZED) 100 MM LONG
(IND/GS/44(a) (6009/PK). GALVANIZING BY HOT DIP.) 		19-11-2010
38 Ordnance Equipment Factory CHIMNEY SEGMENT OR ELBOW
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
39 Ordnance Equipment Factory CLIP 60MM
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
40 Ordnance Equipment Factory CLIP END STRAP BRASS 13MM WE
(IND/GS/468(G)) 		19-11-2010
41 Ordnance Equipment Factory CLIP END STRAP BRASS 19MM
(IND/GS/1541 (5627/PK DT. 21.9.1990)) 		19-11-2010
42 Ordnance Equipment Factory CLIP END STRAP BRASS 25 MM BRONZED UN-PUNCHED
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
43 Ordnance Equipment Factory CLIP END STRAP BRASS 25MM
(IND/GS/1541 (5627/PK DT. 21.9.1990)) 		19-11-2010
44 Ordnance Equipment Factory CLIP END STRAP BRASS 25MM (UNPUNCHED)
(IND/GS/1541(5627/PK)) 		19-11-2010
45 Ordnance Equipment Factory CLIP END STRAP BRASS 51 MM BRONZED
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
46 Ordnance Equipment Factory CLIP IRON (FOR TENT EXTENDABLE)
(CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED.) 		19-11-2010
47 Ordnance Equipment Factory D RING (ITEM NO.1 & 2) AS PER DRG. NO. CQASV-36729420107 (7916/D/PK)
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
48 Ordnance Equipment Factory D. RING 18 MM FOR BAG WATER PROOF
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
49 Ordnance Equipment Factory DEES STEELS VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
50 Ordnance Equipment Factory EYELETS ALU. ALLOY VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
51 Ordnance Equipment Factory EYELETS BRASS VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
52 Ordnance Equipment Factory FOUR WAY MILD STEEL JOINT
(PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015) 		19-11-2010
53 Ordnance Equipment Factory GAL. M.S. SEAL FOR 12 MM WIDE IRON HOOP
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
54 Ordnance Equipment Factory GALVANISED MILD STEEL SEAL FOR USE WITH MILD STEEL STRIP 20 MM WIDE & 0.9 MM THICK
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
55 Ordnance Equipment Factory GALVANISED MILD STEEL SEAL SUITABLE FOR USE WITH POLYPROPYLENE 19 MM WIDE TAPE
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
56 Ordnance Equipment Factory GALVANIZED MILD STEEL SEAL FOR USE WITH MILD STEEL HOOPS 16 MM WIDE & O.9 MM THICK
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
57 Ordnance Equipment Factory GALVANIZED MILD STEEL SEALS SUITABLE FORUSE WITH TAPE POLYTHINE/RAYON STRAPPING 12.5 +/- 0.5MM
(DMSRDE/T&GS/88/333(C)) 		19-11-2010
58 Ordnance Equipment Factory HEATER SPACE OIL BURNING-CONTROL VALVE BODY
(IS: 10742-1983 GR.-I OF TABLE-I FOR GUN METAL.) 		19-11-2010
59 Ordnance Equipment Factory HING CLIP COMPLETE ASSEMBLED WITH LINK FOR BOX C-18
(AS PER DRG. NO. ISV-710) 		19-11-2010
60 Ordnance Equipment Factory HING WITH LINK COMPLETE ASSEMBLED AS PER DRG.NO.SE-221 OF SHEET 2/2 DET.6
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
61 Ordnance Equipment Factory HINGE COMPLETE ASSEMBLED WITH LINK AS PER DRG. NO. SE 113 DET. 16 & 17 FOR CARRIER 6 A/L
(DRG. SHEET 3/11 OF 6573/B/PK) 		19-11-2010
62 Ordnance Equipment Factory HINGE PIN
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
63 Ordnance Equipment Factory HINGES PRESSED STEEL BUTT 4" (100MM)
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
64 Ordnance Equipment Factory HINGES PRESSED STEEL TABLE 2"
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
65 Ordnance Equipment Factory HOOK ASSEMBLY COMPLETE (FOR SLING FOR MP5 KHAKI)
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
66 Ordnance Equipment Factory HOOK BRASS FOR TENT AS PER DRG. NO. IND/TC/2234(C) PAGE NO. 15 (5596/PK)
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
67 Ordnance Equipment Factory HOOK BRASS HAVERSACK RIGHT NICKLE CHROME PLATED
(CQA(GS)/US/324 EXCEPT THAT MATERIAL WILL BE BRASS) 		19-11-2010
68 Ordnance Equipment Factory HOOK BRASS HAVERSACK WE PATT 37 LEFT POLISHED
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
69 Ordnance Equipment Factory HOOK BRASS HAVERSACK WE PATT 37 RIGHT POLISHED
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
70 Ordnance Equipment Factory HOOK BRASS STRAP HAVERSACK LEFT NICKLE CHROME PLATED
(CQA(GS)/US/324 EXCEPT MATL.) 		19-11-2010
71 Ordnance Equipment Factory HOOK BRASS WITH 57 MM TIP NICKLE - CHROME PLATED
(IND/GS/1541 CAT PART NO. CN/8315-000058, NICKLE CHROME) 		19-11-2010
72 Ordnance Equipment Factory HOOK IRON
(CQA(GS)/US/467(b) (5986/PK DT. 8.9.03) EXCEPT) 		19-11-2010
73 Ordnance Equipment Factory HOOK SLING
(DRG. NO.IM-0284 (6304/PK)) 		19-11-2010
74 Ordnance Equipment Factory HOOK SLING MK-I COMPLETE ASSEMBLED BRONGE
(DRG.NO. DD(E) 1864 DS CAT NO.1005005680(2847/B/PK)) 		19-11-2010
75 Ordnance Equipment Factory HOOK STAINLESS STEEL FOR BAG CARRYING RESCUE
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
76 Ordnance Equipment Factory HOOK STEEL (NOS 28 IN A SET) FOR CASES WOOD SORTING FOLDING
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
77 Ordnance Equipment Factory HOOK STEEL FOR BAG WATER PROOF
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
78 Ordnance Equipment Factory HOOK STEEL TO IS:4454 (PT.1) GD.3
(Drawing as per matl. 4 of drawing no. SK-1197) 		19-11-2010
79 Ordnance Equipment Factory HOOK WITH CHAINS AND RINGS
(DRG NO.IND/GS/1659 (d) (638/PK)) 		19-11-2010
80 Ordnance Equipment Factory HOOK WITH RING ASSEMBLED
(AS PER DRG.NO.2356/PK DT.21/09/93) 		19-11-2010
81 Ordnance Equipment Factory HOOKED TIP IN FINISHED CONDITION
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
82 Ordnance Equipment Factory HOOKS ALU. ALLOY 57 MM BLACK ANODISED
(CQA(GS)/US/324 (5653/PK)) 		19-11-2010
83 Ordnance Equipment Factory HOOKS ALU. ALLOY HAVERSACK RIGHT BLACK ANODIZED
(CQA(GS)/US/324 (5653/PK DT. 9.3.2000)) 		19-11-2010
84 Ordnance Equipment Factory HOOKS ALUMN. ALLOY HAVERSACK LEFT BLACK ANODISED
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
85 Ordnance Equipment Factory HOOKS ALUMN. ALLOY WITH TIPS 57MM BLACK ANODISED
(CQA(GS)/US/324 (5653/PK DT.26.12.2003)) 		19-11-2010
86 Ordnance Equipment Factory HOOKS BRASS 57MM
(IND/GS/1541 (5627/PK DT. 19.02.2001)) 		19-11-2010
87 Ordnance Equipment Factory IRON HOOP 23 BG (0.71MM) THICK X 12 MM WIDE
(IS: 1029-1970) 		19-11-2010
88 Ordnance Equipment Factory LINK (40X19X6MM DIA)
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
89 Ordnance Equipment Factory LINK BRASS SIDE BAR (SADDLE SU PATT 02)
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
90 Ordnance Equipment Factory LINK EJECTION CHUTE
(DRG. NO. 675-51-Cb141) 		19-11-2010
91 Ordnance Equipment Factory LINK EXTENSION
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
92 Ordnance Equipment Factory LINK FOR CATCH LOCKING FOR CARRIER 13A DRG. NO. SK-1008)
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
93 Ordnance Equipment Factory LINK FOR HINGE FOR CARRIER-13-A DRG. NO.SK-1002
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
94 Ordnance Equipment Factory LOCK COMPLETE ASSEMBLED WITH LINK AS PERDRG. NO.SE-232 DET.I,14 & 9
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
95 Ordnance Equipment Factory LOCKING CLIP 60 MM
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
96 Ordnance Equipment Factory LOOP PIN
(O.E.F.DRG No. 7610/PK ITEM No.6) 		19-11-2010
97 Ordnance Equipment Factory PIN CARBON STEEL FOR TENT FOR HOT DIP GALVANISED
(IS: 4826-79) 		19-11-2010
98 Ordnance Equipment Factory PIN CARBON STEEL SMALL
(IND/GS/1630 (5836/PK), CADMIUM PLATED AS PER IS:1572-1986) 		19-11-2010
99 Ordnance Equipment Factory PIN TENT ANGLE IRON MED. MK-2 FOR HOT DIP GALVANISED
(IS: 277-85) 		19-11-2010
100 Ordnance Equipment Factory PIN TENT ANGLE IRON MED.MK-2
(CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986) 		19-11-2010
101 Ordnance Equipment Factory PIN TENT ANGLE IRON MED.MK-II
(CQA(GS)/US/428 (5877/PK) & HOT DIP GALVANIZED TO IS:277-1985) 		19-11-2010
102 Ordnance Equipment Factory PIN TENT CARBON STEEL SMALL 8340-000508
(IND/GS/1630 (5836/PK) AND ZINC COATING BY HOTDIP GALVANIZED) 		19-11-2010
103 Ordnance Equipment Factory PLATE HOOK AS PER DRG.NO.SE-232 DET 2
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
104 Ordnance Equipment Factory PLATE HOOK FOR CARRIER 6 A/L AS PER DRG.NO. SE 113 DET 13
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
105 Ordnance Equipment Factory RUNNER
(IND/GS/1817 (5963/PK DT. 15.9.99) ATTACHED DRG.) 		19-11-2010
106 Ordnance Equipment Factory S.M.GALVENISED SEAL FOR 12.00 MM WIDE POLY PROPELENE STRAPPING
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
107 Ordnance Equipment Factory S.M.SPLIT PIN 1.6 X 16MM LONG
(IS:549) 		19-11-2010
108 Ordnance Equipment Factory SEAL LEAD 9.5 MM 3/8" (O.E.F. DRG. NO. SK-710 DT. 17.8.88
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
109 Ordnance Equipment Factory SPRING CLIP COMPLETE ASSEMBLED WITH LINKWITHOUT STRAP FOR BOX C -18
(AS PER DRG. NO. ISV-93) 		19-11-2010
110 Ordnance Equipment Factory SPRINGS VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
111 Ordnance Equipment Factory STRENGTHENING PIECE FOR BOX C-18
(AS PER DRG. NO. ISV-282 A) 		19-11-2010
112 Ordnance Equipment Factory TENT DEES IRON 25MM X20MM X4MM
(IND/GS/1416) 		19-11-2010
113 Ordnance Equipment Factory TENT PIN ANGLE IRON MEDIUM
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
114 Ordnance Equipment Factory THREE WAY MILD STEEL JOINT WITH BASE PLATE
(PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015) 		19-11-2010
115 Ordnance Equipment Factory THREE WAY ROOF POLE MILD STEEL JOINT
(PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015) 		19-11-2010
116 Ordnance Equipment Factory TRIANGULAR "D" RING NICKLE PLATED
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
117 Ordnance Equipment Factory TWISTED PINS
(PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015) 		19-11-2010
118 Ordnance Equipment Factory WASHER ALUM. 5.5MM (I/D) X 10MM (O/D) X 1MM THICK
(IS:2016 TYPE A) 		19-11-2010
119 Ordnance Equipment Factory WASHERS BRASS VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
120 Ordnance Equipment Factory WASHERS STEELS VARIOUS
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010
121 Ordnance Equipment Factory WIRE NAILS IRON ROUND SHANK 150MM X 6 SWG
(AS PER REQUIREMENT & SPECIFICATION) 		19-11-2010

Registration No. : 20800109AAACE4867G1ZH

URN No. : C17072593130

Conditions of Registration: Normal

This Registration has been carried out based on self-declared documents furnished by Vendor.

Changes, if any, in Address or constitution of the Firm, major Machinery/Equipment or Technology should be intimated to the Registration Authority immediately.

The Registration Authority reserves the right to cancel this Registration Certificate at any time.

Registration is valid for five (5) years per cycle and is subject to automatic renewal unless cancelled on account of an administrative reason.

(Troop Comforts Limited)
(Signature is not required)