Troop Comforts Limited
A Government of India Enterprise
Ministry of Defence
REGISTRATION CERTIFICATE
This is to certify that M/S SUNEEL AND COMPANY, 4/22 purana kanpur, Pin-208002 is registered at Troop Comforts Limited for following Items.
| Sr No | Factory/ Unit | Item Nomenclature | Valid Upto |
|---|---|---|---|
| 1 | Ordnance Equipment Factory Hazaratpur | Fabrication of Carrier Main Pack MK-1
( Stitching & fitting of Garniture items as per latest specification governing by AHSPr latest specification governing by AHSP) (Approved For Frame of Carrier man pack ) |
12-06-2027 |
| 2 | Ordnance Clothing Factory Avadi | 8340 001120 UNIVERSAL MEMBER ALUMINIUM ALLOY FOR TENT EXTENDABLE FRAME SUPPORTED[21]
( Specification : AS PER SPECIFICATION) |
29-09-2025 |
| 3 | Ordnance Clothing Factory Avadi | ROOF POLE WITHOUT THREE WAY JOINT FOR TENT EXTENDABLE FRAME SUPPORTER[21]
( Specification : Item code : [2111651005] [ROOF POLE FOR TEFS 4M Spcns. : [8340-001119, ROOF POLE WITHOUT THREE WAY JOINT FOR [TENT EXTENDABLE FRAME SUPPORTED. [SPECIFICATION : U/S SPEC) |
29-09-2025 |
| 4 | Ordnance Clothing Factory Avadi | PEAK POLYETHYLENE
(AS PER ENCLOSED SPECIFICATION) |
09-12-2027 |
| 5 | Ordnance Clothing Factory Avadi | LDPE SHEET FOR PEAK INTERLINING (OP/IP : 280 X 200 MM)
(LDPE SHEET FOR PEAK INTERLINING (OP/IP:280X200MM) PROV.SPECIFICATION No.S/5094/TC-1(b)/Cap Bal OG (Imp) Appendix'B' to JSS:8405-25:2010 APPENDIX B(TEX-1/1299/82/1) The LDPE sheet shall be made from virgin material and shall be free from the holes, embedded foreign matters, surface imperfections, cuts and other defects. Requirements: LDPE Sheet shall conform to the following req. i) Material - Low Density Virgin Polyethylene ii) Density Apparent (g/ml) - 0.95 iii) Tensile Strength (Newton/cm2) - 830 min iv) Elongation at break (%) - 125 min v) Thickness (under 200g/cm2 load, mm) - 1.7 +/- 0.1 vi) Mass (Kg/m2) - 1.6 +/- 0.1 ) |
12-08-2028 |
| 6 | Ordnance Equipment Factory | POLE SIDE ALU. ALLOY COMPLETE ASSEMBLED DRG. NO. CIGS/GS-3/17[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
01-11-2025 |
| 7 | Ordnance Equipment Factory | POLE STANDING ALU. ALLOY COMPLETE ASSEMBLED DRG. NO. CIGS/GS-3/17[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
01-11-2025 |
| 8 | Ordnance Equipment Factory | HAMMER SLADGE DOUBLE FACED 2 KG. WITH HANDLE[21]
( Specification : IS:841-1983 & SUPPL. SCH. CQA(GS)/SS/337(b) (5625/PK) AND AS IN TE.) |
01-11-2025 |
| 9 | Ordnance Equipment Factory | FOUR WAY MILD STEEL JOINT[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
01-11-2025 |
| 10 | Ordnance Equipment Factory | THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
01-11-2025 |
| 11 | Ordnance Equipment Factory | THREE WAY ROOF POLE MILE STEEL JOINT[21]
( Specification : AS PER TENDER) |
01-11-2025 |
| 12 | Ordnance Equipment Factory | POLE STANDING ALUMINIUM ALLOY COMPLETE[21]
( Specification : Specn. No. IND/GS/1587) |
09-12-2025 |
| 13 | Ordnance Equipment Factory | DEES IRON 22MM x 19MM x 4MM[21]
( Specification : CQA (GS) /US/426 (a) Except Dimensions) |
06-01-2026 |
| 14 | Ordnance Equipment Factory | Ring Iron 13MM X 3 MM DIA galvanized Wire[21]
( Specification : IS: 280) |
06-01-2026 |
| 15 | Ordnance Equipment Factory | TENT DEES 206 MM x 130MM x 5 MM[21]
( Specification : CQA(GS)/US/426 (a) Except Size (5757/Pk) Galvanized) |
06-01-2026 |
| 16 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FIXING OF PLY WITH NAILING FINISHING AND HINGE FIXING OF SKID BOARD MI 8[21]
( Specification : Specn No. IND/GS/1726 (c)) |
06-01-2026 |
| 17 | Ordnance Equipment Factory | Toggle Cord Stopper[21]
( Specification : Prov. Specification No. S/6421/Bag Sleeping Lt Wt/TC-6) |
06-01-2026 |
| 18 | Ordnance Equipment Factory | Trade assistance for Frame of Skid Board MI 8[21]
( Specification : Specn No. IND/GS/1726 (c)) |
06-01-2026 |
| 19 | Ordnance Equipment Factory | DEES STEELS VARIOUS[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
06-01-2026 |
| 20 | Ordnance Equipment Factory | CLIP IRON (FOR TENT EXTENDABLE)[21]
( Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED) |
06-01-2026 |
| 21 | Ordnance Equipment Factory | TENT DEES IRON 25MM X 20MM X 4MM[21]
( Specification : IND/GS/1416) |
06-01-2026 |
| 22 | Ordnance Equipment Factory | CHAPE AND LINK ASSEMBLY COMPLETE[21]
( Specification : Specn. No. IND/GS/1726 ( C)) |
13-01-2026 |
| 23 | Ordnance Equipment Factory | Trade Assistance for Stuffed Wrapped And Strung in TAM[21]
( Specification : Specn No.-IND/GS/1587) |
09-02-2026 |
| 24 | Ordnance Equipment Factory | Trade assistance of Pole Door of Tent Arctic Medium[21]
( Specification : Spcn No. IND/GS/0824(a) & IND/GS/1587) |
24-02-2026 |
| 25 | Ordnance Equipment Factory | Trade assistance for Final Welding of Short Elbow Door Door Clip Legs Bottom plate and Stay Bars with HSOB Body[21]
( Specification : Specn No. IND/GS/1691 (a)) |
09-03-2026 |
| 26 | Ordnance Equipment Factory | Trade assistance for Fabrication of Adopter Nut[21]
( Specification : IND/GS/1691 (a)) |
07-05-2026 |
| 27 | Ordnance Equipment Factory | Trade assistance for Fabrication of Bend Pipe[21]
( Specification : IND/GS/1691 (a)) |
07-05-2026 |
| 28 | Ordnance Equipment Factory | Trade assistance for Fabrication of Gland Nut[21]
( Specification : IND/GS/1691(a)) |
07-05-2026 |
| 29 | Ordnance Equipment Factory | Trade assistance for Fabrication of Hose Union[21]
( Specification : IND/GS/1691 (a)) |
07-05-2026 |
| 30 | Ordnance Equipment Factory | Trade assistance for Fabrication of M S Pipe[21]
( Specification : IND/GS/1691 (a)) |
07-05-2026 |
| 31 | Ordnance Equipment Factory | Trade assistance of Fabrication of Union Nut[21]
( Specification : IND/GS/1691 (a)) |
07-05-2026 |
| 32 | Ordnance Equipment Factory | TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG[21]
( Specification : AS PER REQUIREMENT & SPECIFICATION) |
28-06-2026 |
| 33 | Ordnance Equipment Factory | Cast acrylic Sheet Transparent Polymethyl[21]
( Specification : Specn No. IND/GS/1589 (6003/PK) and IS:7569-1987 (Methacrylate Sheet)) |
28-06-2026 |
| 34 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FIXING OF PLY WITH NAILING FINISHING AND HINGE FIXING OF SKID BOARD MI 8[21]
( Specification : Specn No. IND/GS/1726 (c)) |
28-06-2026 |
| 35 | Ordnance Equipment Factory | "RIVETS COPPER VARIOUS[21]
( Specification : AS PER REQUIREMENT AND SPECIFICATION) |
13-07-2026 |
| 36 | Ordnance Equipment Factory | RIVET STEEL FLAT HEAD 3.15MM DIA X 8MM LONG[21]
( Specification : IS:2998-LATEST) |
13-07-2026 |
| 37 | Ordnance Equipment Factory | DEMI BANDEROL BEACON BANDEROL SET ASSY B COMPLETE[21]
( Specification : DRAWING NO.- IND/GS/568(K) & SUPP. SCH. NO. CQA(GS)SS/411(A)) |
13-07-2026 |
| 38 | Ordnance Equipment Factory | PLATEFORM CARGO AERIAL DEL FOR AN 32 AIRCRAFT1508 x 829 MM COMPLETE[21]
( Specification : SPECN. NO. IND/GS/1764 (A) ( 7192/PK)) |
13-07-2026 |
| 39 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE DOOR[21]
( Specification : SPEC. NO.: IND/GS/1587) |
13-07-2026 |
| 40 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE STANDING[21]
( Specification : SPEC. NO.: IND/GS/1587) |
13-07-2026 |
| 41 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF PIN LARGE OF POLE STANDING[21]
( Specification : SPEC. NO.: IND/GS/1587) |
13-07-2026 |
| 42 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF PIN OF POLE DOOR[21]
( Specification : SPEC. NO.: IND/GS/1587) |
13-07-2026 |
| 43 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF PIN SMALL OF POLE STANDING[21]
( Specification : SPEC. NO.: IND/GS/1587) |
13-07-2026 |
| 44 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE DOOR[21]
( Specification : SPEC. NO.: IND/GS/1587) |
13-07-2026 |
| 45 | Ordnance Equipment Factory | TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE STANDING[21]
( Specification : SPEC. NO.: IND/GS/1587) |
13-07-2026 |
| 46 | Ordnance Equipment Factory | FABRICATION OF BELT WAIST ICK
(IND/TC/1550) |
09-12-2027 |
Registration No. : 20800209CSKPS5314K1Z6 Conditions of Registration: Normal This Registration has been carried out based on self-declared documents furnished by Vendor. Changes, if any, in Address or constitution of the Firm, major Machinery/Equipment or Technology should be intimated to the Registration Authority immediately. The Registration Authority reserves the right to cancel this Registration Certificate at any time. Registration will be valid for 03 years
(Troop Comforts Limited) (Signature is not required)